303 Fabric Guard 128oz
303 Fabric Guard 128oz
303 Fabric Guard - 128oz
Features
-
Restores lost water repellency to factory-original levels.
-
Provides powerful protection against water-based stains and soiling.
-
Safe for use on most outdoor natural and synthetic fabrics.
-
Helps resist mildew formation and fabric deterioration.
-
Helps reduce fading caused by outdoor exposure.
-
Does not alter fabric color, feel, softness, flammability, or breathability.
-
Ideal for patio furniture, awnings, umbrellas, boat covers, outdoor cushions, and convertible tops.
Product Overview
303 Fabric Guard keeps fabrics fresh, soft, colorful and breathable…all while adding a powerful coating to repel water and prevent the most serious of stains. Use it to keep rugs clean, leather interiors fresh and covers blemish-free. You can even spray it on your convertible top’s seams to prevent wicking. When applied to clean and dry fabrics, 303® Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.
Directions
- Thoroughly clean the fabric and allow it to dry completely before application.
- Test for colorfastness in an inconspicuous area before treating the entire surface.
- Apply in a well-ventilated area when temperatures are above 21°C (70°F). For best results, apply in warm, sunny conditions.
- Hold the sprayer 8–12 inches from the fabric and spray evenly until the surface is damp, slightly overlapping each pass.
- Avoid overspray on surrounding surfaces and wipe up any excess immediately.
- Allow the treated fabric to cure for 12–24 hours before exposure to moisture or use.
NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured. CURING: 12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303® Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric.
COVERAGE: 40-75 sq. ft (3.7–7 sq. m) per 16fl.oz (473ml) depending on material and application method.
128oz
